SECURITY AND ANTI-THEFT SYSTEM
Security anti-theft system consists of 4 small systems:
1: X250 Safety Stop (Jaguar X250 Safety stop):
Advantages: X250 safety stop is suitable for all problems such as engine failure due to X250 battery failure. It will not be same as SDD. The second step of safety stop cannot go through. You need to remove the BCM and write data or replace with anew ECU. In addition using our security stop script, in the case of security and anti-theft system failure, the script will prompt, allowing the operator to view the guidance prompts to check a part of the anti-theft system, rather than security stop like SDD. The operator can only rely to guess possible problems. With SDD but not with our tool, it will guide you properly and show which ECUS are been programed at moment.
2: DOIP Safety Stop:
The DOIP safety stop is suitable for Jaguar Land Rover DOIP communication protocols, and it can perfectly CUT-OFF or remove the ECU function with the vehicle CCF_MODE.
In addition to the use of our security stop script, in the case of safety stop cannot go, the script will prompt, allow the technician to focus on checking a part of anti-theft system, rather than pathfinder, Safety stop will not go through and leaving you clueless. It’s very easy to find defective Anti-Theft parts with this script, in minutes if you say,
3: Universal Safety Stop:
The Universal Safety Stop is suitable for all Jaguar Land Rover Can Communication Protocols, and with vehicle CCF_MODE can perfectly CUT-OFF or Remove the ECU function.
In addition to the use of our safety stop script, in the case of safety stop cannot go, the script will prompt, allows the Technician to focus on checking a part of the anti-theft system, rather than like Pathfinder and SDD, safety stop cannot go, anti-theft Department system have to checked without any clue.
If you can check Can Link Monitor and Feedback, but most technicians do not understand this procedure and who understands it don’t want to spend a lot of time on it, that’s where our tool comes in handy again.
4. Key learn (key Learning):
KEY Learn is suitable for all Jaguar Land Rover keyless systems, such as AH22/AH42/BJ32/DPLA/FK72/HPLA/J9C3/JPLA/K8D2/L8B2 for older keyless modules do not need to replace the direct execution can clear previous keys and add new keys, and start configuring the new key. The operation is very convenient, fast and safe.
